Bell 206 B2
This Bell 206 B2 is available now, for sale.
The Bell 206 JetRanger is a single-engine light utility helicopter produced by Bell Helicopter Textron, Inc. of the USA. The model has been proven a commercial success with both civilian and military operators around the world.
Aircraft Size
| Aircraft dimension |
English |
Metric |
| Length |
31.2 ft |
9.52 m |
| Rotor Disk |
33.4 ft |
10.18 m |
| Height |
9.5 ft |
2.9 m |
| Baggage Capacity |
15 cubic ft |
0.42 cubic m |
Cabin Size
| Cabin dimension |
English |
Metric |
| Length |
6.9 ft |
2.1 m |
| Width |
3.9 ft |
1.2 m |
| Height |
4.1 ft |
1.25 m |
| Area |
110.18 cubic ft |
3.12 cubic m |
Aircraft Seats
| Layout |
Seats |
| Max Seating |
4 |
| Typical Seating |
4 |
| Pilots |
1 |
Performance Specifications
| Performance |
English |
Metric |
| IFR Range |
260 nm |
482 km |
| Cruise Speed |
114 KTAS |
211 km/h |
| Certified Ceiling |
20,000 ft |
6096 m |
| Rate of Climb |
1540 ft/min |
469 m/min |
| Max Takeoff Weight |
3200 lbs |
1451 kg |
| Max Landing Weight |
3200 lbs |
1451 kg |
| Useful Weight |
|
|
| Payload with Full Fuel |
1487 lbs |
674 kg |
Average Prices
| Costs |
USD |
EUR |
| Purchase New |
$1.0 M |
€898k |
| Purchase Used |
$500k – 1.0M |
€449 – 898k |
| Hourly Rate |
$900/hr |
€900/hr |
Disclaimer: Information on this site is provided to give a general overview of a model’s specifications. This information may not be accurate or current and is not valid for flight planning or any other aircraft operations. No warranty of fitness for a particular purpose is made or implied. Flight planning or any other aircraft operations should only be done using official technical information provided by the manufacturer or FAA.
Are you interested in learning more about aircraft our team has overhauled? Visit our Thoroughbred Aviation Maintenance website to watch several videos showcasing our project to get Heavy D Sparks’ Black Hawk helicopter back into prime flying condition. We assisted not only with the maintenance required but also with the required certifications and PMI1 and PMI2 inspections.
We rebuild aircraft with the highest level of workmanship and attention to detail – and always with the goal of utmost safety.
